Self-Adhesive Butyl Tape used for joining sections of Cemprotec 2000-S Overview Cemprotec 2000-BJT is a high performance butyl tape which is designed to join two pieces of Cemprotec 2000-S waterproof composite tape together. Embedded into our Cemprotec range of cementitious coatings, it forms an elastomeric joint between two lengths of Cemprotec 2000-S to accommodate movement…. Read more
Tag Results for: power-generation-renewables
28 Results in Products
Cemprotec Flex-Tape
Multi-directional Reinforcing Tape for Cracks & Joints Overview Cemprotec Flex-Tape is a woven polyamide tape designed for the reinforcing Flexcrete’s range of decorative protective coatings over cracks, joints and gaps. Advantages Unique composition specially designed for use with Flexcrete membranes. Will accommodate thermal and structural movement in widely varying conditions. Easily cut to any length to reinforce a… Read more
Bond-Prime
Primer to Seal & Stabilise Substrates Overview Flexcrete’s Bond-Prime is a single component, water based, epoxy modified polymeric primer for sealing and stabilising substrates prior to the application of the specialist decorative and protective membranes in the Flexcrete range. Substrates to be treated include: Concrete Mortars and Renders Masonry Polyurethane Foam Phenolic Board Existing paints Plaster… Read more
Roofdex HB
High Performance Liquid Roofing System Overview Roofdex HB is a waterborne, high build, elastomeric, cold fluid applied liquid roofing membrane system which incorporates unique in-film protectant technology. Designed for the weatherproof protection of both flat and pitched roofs, it is especially suited for use in hot, humid, tropical climates due to its ability to reflect sunlight… Read more
Monodex Smooth
Water-based Elastomeric Decorative Coating (EN1504-2) Overview Monodex Smooth is a high performance water based, elastomeric, high build, decorative coating which provides protection against carbonation and water ingress, yet allows damp substrates to breathe. It is ultra-fast drying which enables two coat applications to take place on the same day and facilitates year round usage. Monodex Smooth resists the… Read more
Monodex Ultra
Water-based Flexible Decorative Coating (EN1504-2) Overview Monodex Ultra is a technically advanced, minimal VOC, water-based decorative coating which protects against carbonation and water ingress without entrapping moisture. It is fast drying for year round use externally with excellent fire performance characteristics for internal use. Monodex Ultra prevents water ingress and resists the growth of mould and fungi,… Read more
Cemprotec Levelling Coat
Cementitious Self-Levelling Mortar for Concrete Floors Overview Cemprotec Levelling Coat is a two component, epoxy and polymer modified waterborne cementitious levelling screed designed to level out rough, tamped concrete prior to the application of a protective flooring system. It is designed to be used as a flowing screed prior to the application of Cemprotec E-Floor or Cemprotec E-Floor HB in applications… Read more
Cemprotec EF Grit
Quartz aggregate for abrasion and skid resistance within E-Floor systems Overview Cemprotec EF Grit is a quartz aggregate for abrasion and skid resistance within E-Floor systems.
Cemprotec EF Primer
Stabilises and Seals Cementitious & Asphalt Substrates Overview Cemprotec EF Primer is used to stabilise and seal cementitious and asphalt floors prior to the application of the Cemprotec range of cementitious coatings and mortars. It can overcome some inadequacies in surface preparation and helps minimise the risk of out-gassing from the substrate. Cemprotec EF Primer is a modified,… Read more
Cemprotec E-Floor HB
Epoxy and Polymer Modified Cementitious Flooring: 3-6mm (EN 1504-02) Overview Cemprotec E-Floor HB is a major advancement in flooring technology incorporating the benefits of copolymer and epoxy resin technologies into a self smoothing, water based, cementitious flooring system. This chemical combination gives a hard, durable 3-6mm thick coating with excellent resistance to abrasion, water, chloride ions… Read more
Cemprotec E-Floor
Epoxy and Polymer Modified Cementitious Flooring: 2mm (EN 1504-02) Overview Cemprotec E-Floor is a major advancement in flooring technology, incorporating the benefits of copolymer and epoxy resin technologies into a self smoothing, water based, cementitious system. This chemical combination gives a hard, durable 2mm thick coating with excellent resistance to abrasion, water, chloride ions and aggressive… Read more
Cemprotec E942
Epoxy and Polymer Modified Cementitious Coating (EN 1504-02) Overview Cemprotec E942 incorporates the benefits of copolymer and epoxy resin technologies into a water based cementitious system to give a hard, durable coating with excellent resistance to water, chloride ions, oxygen and aggressive chemicals. Cemprotec E942 can be used as a stand-alone anti-corrosion coating for ferrous metals… Read more
Cemprotec Elastic
Elastomeric Cementitious Modified Flexible Coating (EN1504-2) Overview Cemprotec Elastic is an elastomeric, cementitious modified, polymer-rich coating which maintains its flexibility under permanent immersion and when exposed externally. It is ideally suited for waterproofing and protecting concrete and masonry structures which exhibit cracking and where further movement is expected. When mixed Cemprotec Elastic exhibits a good degree of thixotropy to… Read more
Cementitious Coating 851
Surface Protection System – Protection against Ingress (EN1504-2, DWI 31, BBA, WRAS) Overview Cementitious Coating 851 is designed for internal and external structural waterproofing of concrete and other mineral substrates. Cementitious Coating 851 resists positive and negative pressure under 100m head in water retaining and below ground structures as well as roofs and decks. It provides… Read more
Biodex Wash
Powerful Surface Treatment for use Prior to the Application of Primers, Coatings and Repair Mortars in the Flexcrete Range (HSE No. 9351) Biodex Wash Overview Flexcrete’s Biodex Wash is designed to kill active mould, fungal and bacterial spores and organisms such as moss, lichen and algae, prior to the application of primers, coatings and repair mortars… Read more
Cure-Seal WB
Water Based Curing Compound & Clear Sealer (BBA) Overview Cure-Seal WB is a non-degrading acrylic resin sealer which forms a clear, elastic, durable matrix on the surface of cementitious substrates. When used as a curing membrane on Flexcrete mortars and coatings, it conforms to the requirements for water retention given in ASTM C309. It can… Read more
Cemprotec GFM
Advanced Glass Fibre Reinforcement Matting System Overview Cemprotec GFM 225 is an advanced glass fibre reinforcement matting system used in conjunction with Flexcrete membranes to greatly increase additional tensile strength and tear resistance. Its special design provides fast wetting out properties and ease of moulding around the most complex roof details to produce a fully… Read more
Cemprotec 2000-S
Flexible Waterproof Sealing Tape (WRAS) Overview Cemprotec 2000-S is an advanced, elastomeric, highly tear resistant, breathable, waterproof composite tape, which is embedded in the Cemprotec range of cementitious coatings to give a highly flexible, impermeable seal over “live” cracks and expansion or construction joints in waterproofing applications. Advantages Permanently elastomeric composite tape exhibiting over 600%… Read more
Cemprotec MCI® 2020
Surface Applied Corrosion Inhibitor Overview Cemprotec MCI® 2020 is a surface-applied corrosion inhibitor formulated to migrate through concrete on existing structures to seek out and help to protect the steel reinforcement. It should be used as part of the Flexcrete Concrete Repair and Protection System on reinforced concrete structures where additional protection is required, particularly… Read more
Monolevel FC
Class R2 Fairing Coat (EN1504-3) Overview Monolevel FC is an engineering quality fairing coat for filling minor blow holes and defects, and for repairing surface imperfections. Monolevel FC can be used in thin screed applications to level both vertical and horizontal concrete surfaces and to reinstate cover while providing a fair faced anti-carbonation finish. Monolevel FC is a single… Read more
Monolevel 844SP
Class R4 Waterproof Screed & Pore Filler (EN1504-3, DWI 31, WRAS) Overview Monolevel 844SP is a fully waterproof, engineering quality fairing coat for filling minor blow holes and defects, and for repairing surface cavities and honeycombed concrete. Monolevel 844SP can be used in thin screed applications to level both vertical and horizontal concrete surfaces and to reinstate… Read more
Steel Reinforcement Protector 841
Reinforcement Corrosion Protection (EN1504-7, DWI 31, BBA) Overview Steel Reinforcement Protector 841 is a corrosion preventative, flexible coating to protect steel reinforcement prior to the application of the relevant Flexcrete concrete repair mortars. Steel Reinforcement Protector 841 consists of two components, a cementitious powder and a polymer dispersion which react chemically together to passivate, with the aid of corrosion… Read more
Monomix WS
Class R3 General Purpose Structural Spray Applied Repair Mortar (EN1504-3, DWI 31, BBA, WRAS) Overview Monomix WS is a low density, high strength, shrinkage compensated mortar, which can be applied by wet process spraying techniques for the structural repair, rendering and profiling of vertical, horizontal and overhead surfaces. Monomix WS is a single component concrete repair mortar which… Read more
Monomix HD
Class R4 High Strength Structural Repair Mortar (EN1504-3) Overview Monomix HD is a high strength, waterproof, shrinkage compensated, standard density mortar with good abrasion resistance for the structural repair, rendering and profiling of vertical, overhead and horizontal surfaces including trafficked areas. Monomix HD is a single component cementitious repair mortar which incorporates the most advanced cement chemistry,… Read more
Monomix
Class R3 General Purpose Structural Repair Mortar (EN1504-3, DWI 31, BBA, WRAS) Overview Monomix is a low density, high strength, shrinkage compensated, waterproof mortar for the structural repair, rendering and profiling of vertical, horizontal and overhead surfaces. Monomix is a single component cementitious repair mortar which incorporates the most advanced cement chemistry, microsilica, fibre and styrene acrylic copolymer… Read more
Marine Mortar S
Structural Concrete Repair Mortar for Marine and Tidal Areas (BBA) Overview Marine Mortar S is used for the structural repair and profiling of vertical, horizontal and overhead surfaces in marine and tidal areas which are subject to early immersion. Marine Mortar S is a thixotropic, fibre reinforced, polymer modified, cementitious mortar with excellent cohesion for use in… Read more
Fastfill WP
Rapid Setting Water Plugging Mortar Overview Fastfill WP is a rapid setting, polymer modified cementitious water plugging mortar for arresting water seepage and infiltration under pressure through cracks, joints and voids in concrete and masonry. Fastfill WP can also be used for rapid sealing and jointing in and around pipework, or in water retaining structures. Fastfill WP is a single component,… Read more
Fastfill
Class R4 Rapid Setting Structural Repair Mortar (EN1504-03, DWI 31, WRAS, BBA) Overview Fastfill is a rapid setting, Portland cement-based structural mortar for the durable repair of concrete which cannot be taken out of service for long periods, or in areas subjected to heavy wear such as roads, runways, bridges, decks, floors and footpaths. Fastfill can be… Read more
10 Results in Projects
Tie-Hole Filler for New Low Level Nuclear Waste Facility
Filler for Tie-Holes on New Low Level Waste & Salt Store Facilities Background Dounreay Nuclear Power Station was first opened in the 1950’s to pursue the UK Government’s policy of developing reactor technology and three nuclear reactors were subsequently constructed. Due to the high risk activity, all three reactors have since been shut down and nuclear… Read more
Cementitious Coating Provides Quick Solution for Tamar Valley Power Station
Lining of freshly cast concrete bunds to allow for early installation of a resin coating system. Background Located at Bay Bell near George Town on the Tamar River in Tasmania, the Tamar Valley Power Station relies on LNG fed from an underwater pipeline in the Bass Strait. The station is operated by Aurora Energy, the… Read more
Concrete Repairs to Slip-Formed Waste Bunker Walls
Concrete repairs to slip formed concrete in the waste storage bunker Background The Riverside Resource Recovery (RRR) Energy from Waste facility was constructed at Belvedere in the London Borough of Bexley. It began operation in 2011 and is one of the UK’s most efficient energy recovery plants, processing waste from households and businesses in central London, as well as… Read more
Rapid Reinstatement of Concrete Floors at Waste Treatment Facility
Rapid reinstatement of concrete floors in demanding service conditions. Background £125m was invested in this ultra-modern facility where up to 45% of Lancashire’s waste is treated in an internal processing environment to prevent noise and odour escaping. Within one year of opening, the concrete floors have suffered extensive physical damage. This is caused by the abrasive action of… Read more
Concrete Reinstatement for Honeycombed Concrete Walls
Reinstating Honeycombed Concrete Walls at Waste Processing Plant Background This state of the art £125m waste processing plant has been built in Thornton Cleveleys in Lancashire on the site of the former ICI works by W2R, a partnership between Bovis Lend Lease and Australian firm GRD Minproc Ltd, on behalf of Lancashire Waste Partnership. It… Read more
Enhanced Concrete Cover for Bridge Beams
Additional Concrete Cover & Waterproofing to Pre-cast, Pre-stressed Bridge Beams Background Starting in 2011, the Riverside Energy from Waste (EFW) Facility at Belvedere will process 585,000 tonnes of residual waste annually to generate electricity for 66,000 homes in London. To minimise congestion on the roads, the waste will be transported by barge along the River Thames to a… Read more
Concrete Waterproofing & Protection on Water Intake Passages
Waterproofing & Protection of Water Intake Passages Suffering from ASR (Alkali-Silica Reaction) Background Mactaquac Dam is part of a hydroelectric plant on the Saint John River in the Canadian province of New Brunswick operated by NB Power Corporation. It has a capacity of 672 megawatts with 6 turbines generating 20% of New Brunswick’s power. Building started in… Read more
Protection of Steel Water Pipes with Cemprotec E942
External protection of steel water pipes totalling 1500m². Background Alcan’s aluminium smelter in Fort William relies on the supply of cooling water which is collected in a hillside reservoir with delivery to the plant through a series of large bore pipes. Owing to the exposed location, the existing paint had suffered failure with extensive rusting evident…. Read more
Concrete Floor Moisture Suppression at Ammässuo Waste Treatment Centre in Finland
Moisture suppression on 1200m² of concrete floor in a tunnel prior to applying a decorative epoxy coating. Background Situated 30km to the west of Helsinki in Ämmässuo, Finland’s newest and largest waste treatment centre houses a modern compost handling system. The design incorporates an underground tunnel requiring a highly chemical resistant epoxy floor finish. Due… Read more
Concrete Reinstatement at the Lakeside Energy from Waste Facility
Reinstating areas of drag on newly constructed slip-formed concrete faces Background The Lakeside Energy from Waste (EfW) facility at Colnbrook has been operational since 2010. Located in close proximity to Heathrow T5, it was constructed at a total cost of £125m, with the civil engineering package alone valued at £35m. The facility is capable of… Read more