Interactive Illustration

Flexcrete's range of weatherproof, anti-carbonation coatings provide ultimate protection against the ingress of carbon dioxide, oxygen and water, whilst allowing damp substrates to breathe without blistering.

Find out more here

Our cold liquid applied coatings are faster, safer and less labour intensive to apply than conventional roofing materials. There’s no need to strip off old roofing membranes and application can go ahead without any disruption to normal routines within the underlying building.

Find out more here

Monodex Clear is a transparent, weather resistant, elastomeric waterborne coating for use where it is important to maintain the surface appearance of the concrete substrate, whilst still providing excellent anti-carbonation and weatherproof protection.

Find out more here

Flexcrete products have been successfully installed in many areas connected to the rail industry. Solutions include rapid setting, high strength repair mortars, impermeable waterproofing coatings and hard-wearing, trafficable cementitious floor coatings.

Find out more here

Flexcrete provide a wide range of solutions for multi-storey car parks and podium decks. This includes high performance anti-carbonation coatings, concrete repair materials, roof deck waterproofing and trafficable cementitious floor coatings.

Find out more here

Cemprotec Elastic is a water-based, protective coating with an ultra low VOC rating and certification to EN 1504 Part 2. It is permanently elastomeric and is also independently tested for root resistance, a vital consideration in green roof design.

Find out more here

Flexcrete provide a wide range of solutions for multi-storey car parks and podium decks. This includes high performance anti-carbonation coatings, concrete repair materials, roof deck waterproofing and trafficable cementitious floor coatings.

Find out more here

Our range of solutions for infrastructure includes highly engineered repair mortars, fairing coats and renders, high performance decorative anti-carbonation coatings and waterproof anti-carbonation coatings for both steel and concrete based on proven polymer/cement technology.

Find out more here

The water-based, low hazard, low odour nature of Flexcrete products makes them perfectly suited for use in the utilities sector, especially during maintenance work when facilities often remain in operation.

Find out more here

Flexcrete’s cementitious coatings can be applied directly to ferrous metals without the need for primers and form a dense barrier designed to keep out the fuels for corrosion, achieving ultra-low permeability and diffusion resistance to oxygen and other gasses whilst preventing chloride ingress.

Find out more here

Flexcrete’s rapid setting, high strength mortars and water-based cementitious polymer and epoxy modified coatings can be applied in damp environments without primers. Suitable for both concrete and steel, they cure to form a waterproof, protective layer with chemical resistance to H2S and sulphuric acid.

Find out more here

Flexcrete’s cementitious coatings are engineered so that just a 2mm application is equivalent to a minimum of 100mm of additional good quality concrete cover. Rapidly and easily applied by brush or spray, these coatings offer unparalleled resistance to water, carbon dioxide and chlorides.

Find out more here

At Flexcrete, we have been developing highly innovative solutions for repairing, protecting, waterproofing and decorating buildings and other commercial structures for over three decades. Our products are trusted to perform and can be found on some of the world’s most iconic buildings.

Find out more here

Flexcrete's cementitious coatings have a long and proven track record of treating both steel and concrete in coastal environments. In particular, E942 offers exceptional steel corrosion protection for sheet piled walls. It can be applied to damp substrates and be subjected to immersion just two hours after application.

Find out more here

Flexcrete has long been recognised as a foremost supplier of high performance repair and protection systems for marine structures. Our products are suitable for application in both tidal and splash zones, offering unsurpassed resistance to chloride ingress.

Find out more here

Flexcrete’s Biodex water-based hygienic coatings provide total protection against bacterial contamination and ensure that internal walls and ceilings comply with today’s rigorously enforced hygiene legislation.

Find out more here

Flexcrete's solutions for bridges includes a full range of engineering quality mortars and high performance cementitious and anti-carbonation coatings. Our products are CE marked in accordance with BS EN 1504 and meet the high performance standards required by Highways Agency Specification Clause 1770.

Find out more here

At Flexcrete we manufacture and supply a comprehensive range of concrete repair systems, perfectly suited to both new build and refurbishment construction projects. Our products are designed to solve complex structural problems and reinstate structural integrity whilst causing the minimum of disruption during application.

Find out more here

At Flexcrete we manufacture and supply a comprehensive range of concrete repair systems, perfectly suited to both new build and refurbishment construction projects. Our products are designed to solve complex structural problems and reinstate structural integrity whilst causing the minimum of disruption during application.

Find out more here

Flexcrete has developed the Monodex range of weatherproof, anti-carbonation coatings to provide ultimate protection against the ingress of carbon dioxide, oxygen and water, whilst allowing damp substrates to breathe without blistering.tion.

Find out more here

Flexcrete's advanced repair mortars and cementitious coatings are approved under Regulation 31(4)(a)for use in public drinking water supplies and are WRAS listed. Our water-based, low odour products mean there's minimal environmental risks and minimal disruption during application.

Find out more here

For both refurbishment and new build works, Flexcrete offers a wide range of impermeable, sulphate resistant, cementitious coating for structural waterproofing of below ground and water retaining structures.

Find out more here

Flexcrete has a highly engineered range of repair and protection materials for use on coastal and river walls, helping to rectify common problems such as cracking and degradation caused by the damaging effects of carbonation.

Find out more here

Flexcrete’s fast-track cementitious flooring systems have an outstanding track record of successful use in highly demanding areas such as industrial factories, ramps & loading areas, retail facilities, sports halls, car parks, shopping centres and hotels to name a few.

Find out more here

Flexcrete's range of repair and protection systems are ideal for use in the renewables and energy generation sector – including facilities related to fossil, nuclear, wind, hydro-power and energy from waste. These assets require preventative maintenance to ensure services are maintained and future costs are controlled.

Find out more here

Fastfill is a rapid setting, Portland cement-based structural mortar for the durable repair of concrete which cannot be taken out of service for long periods, or in areas subjected to heavy wear such as roads, runways, bridges, decks, floors and footpaths.

Find out more here