Reinforcement Corrosion Protection (EN1504-7, DWI 31, BBA)


Steel Reinforcement Protector 841 is a corrosion preventative, flexible coating to protect steel reinforcement prior to the application of the relevant Flexcrete concrete repair mortars.

Steel Reinforcement Protector 841 consists of two components, a cementitious powder and a polymer dispersion which react chemically together to passivate, with the aid of corrosion inhibitors, and protect steel reinforcement. Steel Reinforcement Protector 841 has excellent adhesion to steel and concrete allowing high bond strengths with Flexcrete Repair Mortars. Steel Reinforcement Protector 841 forms a highly alkaline coating with a degree of elasticity which not only protects the steel from aggressive acid gases, moisture and chlorides, but passivates the steel surface chemically to prevent further rust formation.


  • Brush applied in two coats with minimal inter-coat waiting time
  • Economic coating gauged as required to the correct consistency using mixing kit provided
  • High alkalinity and corrosion inhibitors rapidly reinstate passivating layer around reinforcement to give long term corrosion protection
  • Tolerant to lower levels of steel preparation
  • Dense matrix protects the steel from aggressive acid gases, moisture and chlorides
  • High insulation properties prevent further electrochemical corrosion
  • Produces a hard coating with a degree of elasticity
  • Excellent adhesion to steel ensures adequate pull-out resistance is achieved
  • Non toxic when cured.


CE marked in accordance with BS EN 1504 Part 7. Authorised under Regulation 31 for use in the supply of drinking water. Approved by the BBA, Certificate No. 05/4276.

Specification Clause

The two-component, corrosion prevention coating shall consist of a cementitious powder and a polymer dispersion and shall be CE marked in accordance with BS EN 1504-7. It shall be BBA Certified and comply with the following performance specification:

  • Typical compressive strength of 32 MPa and typical flexural strength of 10.5 MPa
  • Impermeable to water under 10 bar hydrostatic pressure such that a 2mm coating is equivalent to 1000mm of concrete
  • Resistance to chloride ion diffusion in excess of 35 years in accordance with Vinci Technology
  • Oxygen diffusion coefficient to be no greater than 5.24 x 10-5 cm2/sec.
Find A Steel Reinforcement Protector 841 Stockist

Project Profiles

Browse through some of the projects we’ve completed using Steel Reinforcement Protector 841.

Flexcrete CPD Presentations

If you would like to find out more about Steel Reinforcement Protector 841, and Flexcrete's other Products why not arrange a CPD Presentation.

    Full Name




    Telephone Number


    Thank you! Your subscription has been confirmed. You'll hear from us soon.