15 Results in Products

Cemprotec 2000-BJT

Self-Adhesive Butyl Tape used for joining sections of Cemprotec 2000-S Overview Cemprotec 2000-BJT is a high performance butyl tape which is designed to join two pieces of Cemprotec 2000-S waterproof composite tape together. Embedded into our Cemprotec range of cementitious coatings, it forms an elastomeric joint between two lengths of Cemprotec 2000-S to accommodate movement…. Read more

Cemprotec Flex-Tape

Multi-directional Reinforcing Tape for Cracks & Joints Overview Cemprotec Flex-Tape is a woven polyamide tape designed for the reinforcing Flexcrete’s range of decorative protective coatings over cracks, joints and gaps. Advantages Unique composition specially designed for use with Flexcrete membranes. Will accommodate thermal and structural movement in widely varying conditions. Easily cut to any length to reinforce a… Read more

Bond-Prime

Primer to Seal & Stabilise Substrates Overview Flexcrete’s Bond-Prime is a single component, water based, epoxy modified polymeric primer for sealing and stabilising substrates prior to the application of the specialist decorative and protective membranes in the Flexcrete range. Substrates to be treated include: Concrete Mortars and Renders Masonry Polyurethane Foam Phenolic Board Existing paints Plaster… Read more

Roofdex HB

High Performance Liquid Roofing System Overview Roofdex HB is a waterborne, high build, elastomeric, cold fluid applied liquid roofing membrane system which incorporates unique in-film protectant technology. Designed for the weatherproof protection of both flat and pitched roofs, it is especially suited for use in hot, humid, tropical climates due to its ability to reflect sunlight… Read more

Cemprotec Levelling Coat

Cementitious Self-Levelling Mortar for Concrete Floors Overview Cemprotec Levelling Coat is a two component, epoxy and polymer modified waterborne cementitious levelling screed designed to level out rough, tamped concrete prior to the application of a protective flooring system. It is designed to be used as a flowing screed prior to the application of Cemprotec E-Floor or Cemprotec E-Floor HB in applications… Read more

Cemprotec EF Grit

Quartz aggregate for abrasion and skid resistance within E-Floor systems Overview Cemprotec EF Grit is a quartz aggregate for abrasion and skid resistance within E-Floor systems.

Cemprotec EF Primer

Stabilises and Seals Cementitious & Asphalt Substrates Overview Cemprotec EF Primer is used to stabilise and seal cementitious and asphalt floors prior to the application of the Cemprotec range of cementitious coatings and mortars. It can overcome some inadequacies in surface preparation and helps minimise the risk of out-gassing from the substrate. Cemprotec EF Primer is a modified,… Read more

Cemprotec E-Floor HB

Epoxy and Polymer Modified Cementitious Flooring: 3-6mm (EN 1504-02) Overview Cemprotec E-Floor HB is a major advancement in flooring technology incorporating the benefits of copolymer and epoxy resin technologies into a self smoothing, water based, cementitious flooring system. This chemical combination gives a hard, durable 3-6mm thick coating with excellent resistance to abrasion, water, chloride ions… Read more

Cemprotec E-Floor

Epoxy and Polymer Modified Cementitious Flooring: 2mm (EN 1504-02) Overview Cemprotec E-Floor is a major advancement in flooring technology, incorporating the benefits of copolymer and epoxy resin technologies into a self smoothing, water based, cementitious system. This chemical combination gives a hard, durable 2mm thick coating with excellent resistance to abrasion, water, chloride ions and aggressive… Read more

Cemprotec E942

Epoxy and Polymer Modified Cementitious Coating (EN 1504-02) Overview Cemprotec E942 incorporates the benefits of copolymer and epoxy resin technologies into a water based cementitious system to give a hard, durable coating with excellent resistance to water, chloride ions, oxygen and aggressive chemicals. Cemprotec E942 can be used as a stand-alone anti-corrosion coating for ferrous metals… Read more

Cemprotec Elastic

Elastomeric Cementitious Modified Flexible Coating (EN1504-2) Overview Cemprotec Elastic is an elastomeric, cementitious modified, polymer-rich coating which maintains its flexibility under permanent immersion and when exposed externally. It is ideally suited for waterproofing and protecting concrete and masonry structures which exhibit cracking and where further movement is expected. When mixed Cemprotec Elastic exhibits a good degree of thixotropy to… Read more

Biodex Wash

Powerful Surface Treatment for use Prior to the Application of Primers, Coatings and Repair Mortars in the Flexcrete Range (HSE No. 9351) Biodex Wash Overview Flexcrete’s Biodex Wash is designed to kill active mould, fungal and bacterial spores and organisms such as moss, lichen and algae, prior to the application of primers, coatings and repair mortars… Read more

Cure-Seal WB

Water Based Curing Compound & Clear Sealer (BBA) Overview Cure-Seal WB is a non-degrading acrylic resin sealer which forms a clear, elastic, durable matrix on the surface of cementitious substrates. When used as a curing membrane on Flexcrete mortars and coatings, it conforms to the requirements for water retention given in ASTM C309. It can… Read more

Cemprotec GFM

Advanced Glass Fibre Reinforcement Matting System Overview Cemprotec GFM is an advanced glass fibre reinforcement matting system used in conjunction with Flexcrete membranes to greatly increase additional tensile strength and tear resistance. Its special design provides fast wetting out properties and ease of moulding around the most complex roof details to produce a fully armoured,… Read more

Cemprotec 2000-S

Flexible Waterproof Sealing Tape (WRAS) Overview Cemprotec 2000-S is an advanced, elastomeric, highly tear resistant, breathable, waterproof composite tape, which is embedded in the Cemprotec range of cementitious coatings to give a highly flexible, impermeable seal over “live” cracks and expansion or construction joints in waterproofing applications. Advantages Permanently elastomeric composite tape exhibiting over 600%… Read more

6 Results in Projects

Concrete Cover Enhancement for Major Natural Gas Facility

Enhancement of Concrete Cover on Reinforced Concrete Caissons Background The Gorgon Project is one of the world’s largest natural gas projects. It involves the development of the Gorgon and Jansz-lo gas fields about 80 miles off the coast of Western Australia and includes the construction of a huge Liquefied Natural Gas (LNG) plant on Barrow… Read more

Waterproofing Concrete Floors at Roosecote Power Station

Waterproofing of internal floors. Background Roosecote Power Station is a gas-fired and former coal-fired power station situated in Barrow-in-Furness, Cumbria. The current power station was the UK’s first Combined Cycle Gas Turbine unit (CCGT) supplying electricity to the National Grid. The entire facility is protected by a fire sprinkler system, including the corridors which carry control cables above the… Read more

External Corrosion Protection for Fuel Pipeline at Tobago Airport

External corrosion protection of 4” diameter aviation fuel pipeline prior to burying. Background On behalf of the client, Trindad’s National Petroleum Company, an innovative solution was sought to the problem of corrosion of a buried aviation fuel supply line. Located in soft sand in close proximity to both the coastline and swamp area, the environment… Read more

Heavy Duty Corrosion Protection for Steel Sea Water Intake Pipes

Corrosion protection for steel sea water intake pipes. Background With probably the most hostile climate and harshest service conditions to cope with, RasGas are aware of the need to constantly assess new technologies for heavy-duty corrosion protection. The shear size of the new sea water intake pipes for the expansion of the Ras Laffan facility… Read more

Corrosion Protection for Steel Gas Pipeline in Venezuela

External protection of 48,000m² of welded steel, gas pipeline before being buried. Background This pipeline carries 300 million ft³ of gas per day at a pressure of 1200psi. PDVSA sought an environmentally friendly stand-alone coating with guaranteed corrosion protection for the remaining service life of the pipeline. Good adhesion to both bare steel and remaining… Read more

Corrosion Protection of Metal Flotation Unit with E942

Corrosion protection of metal flotation unit. Background Mera S.A. works extensively with oil and gas companies in Argentina. They have special expertise in coating technology and were very keen that Tecpetrol should have the opportunity to evaluate Flexcrete’s thin film cementitious anti-corrosive coating, Cemprotec E942 as an alternative to the more traditional finishes with which… Read more